Knowledge Bank

A mid-infrared frequency comb tunable from 2.7$\mu$m to 4.7$\mu$m (3700cm$\mathrm{<mrow\; data-mjx-texclass="ORD">-1</mrow>}$ to 2100cm$\mathrm{<mrow\; data-mjx-texclass="ORD">-1</mrow>}$) has been produced using a fiber laser and difference frequency generation in a periodically poled LiNbO$3$ (PPLN) crystal. An amplified Yb-doped femtosecond fiber laser is centered at a wavelength of 1.04$\mu$m, with 100MHz repetition frequency and up to 2.5W average output power. Part of this laser power is focused into a photonic crystal fiber to produce a Raman-shifted soliton tunable over a range from 1.3$\mu$m to 1.7$\mu$m. The remaining 1.04$\mu$m light is combined with the wavelength-shifted spectrum and focused into the PPLN to produce a difference frequency comb spanning $\sim$200nm(180cm$^{-1}$)inthemid-infrared.ByadjustingtheRaman-shiftedsolitonandPPLN,thecenterwavelengthoftheMIRcombistunedovertheoutputrange,withamaximumpowerofupto35mWnear3.3$\mu$m.\ Sum frequency generation between the MIR comb and a CW 1064nm laser shifts the frequency comb spectrum back into the near-infrared around 800nm. This sum frequency step is taken in order to utilize detectors and techniques that are currently more accessible in the visible and near-infrared ranges. Preliminary results have shown MIR methane absorption lines observable in the upconverted 800nm spectrum on a commercial optical spectrum analyzer. We intend to measure this upconverted spectrum at high resolution using a two-dimensional dispersion and imaging technique \textbf{445}, 627 (2007).} to take advantage of the precisely known frequency characteristics of each individual MIR comb line.