Show simple item record

dc.creatorDeeds, W. E.en_US
dc.date.accessioned2006-06-15T12:56:24Z
dc.date.available2006-06-15T12:56:24Z
dc.date.issued1959en_US
dc.identifier1959-L-5en_US
dc.identifier.urihttp://hdl.handle.net/1811/7883
dc.description$^{*}$ Supported by a contract with the Air Force Cambridge Research Center.en_US
dc.descriptionAuthor Institution: Department of Physics and Astronomy, The University of Tennesseeen_US
dc.description.abstractA simple, alternating current stabilizer has been developed for Nernst glowers. The glower power is regulated by a magnetic amplifier, which is controlled by a D. C. signal from a photocell. The photoconductive cell monitors the output of the glower trough a Corning glass filter and maintains a constant radiant flux in the near infrared. The stabilizer was developed to eliminate slow drift of the glower output in order to facilitate intensity measurements. However, the short term stability has also been improved, so that the apparent noise level is lower. An all-electronic, direct current stabilizer was developed previously and worked very well. However, the useful lifetime of the glowers was greatly shortened by polarization caused by the direct current.en_US
dc.format.extent83035 bytes
dc.format.mimetypeimage/jpeg
dc.language.isoenen_US
dc.publisherOhio State Universityen_US
dc.titleSPECTROSCOPIC SOURCE $STABILIZER^{*}$en_US
dc.typearticleen_US


Files in this item

Thumbnail

Items in Knowledge Bank are protected by copyright, with all rights reserved, unless otherwise indicated.

This item appears in the following Collection(s)

Show simple item record