Show simple item record

dc.contributor.advisorWilliams, James
dc.creatorPavka, Paul
dc.date.accessioned2006-05-22T15:09:00Z
dc.date.available2006-05-22T15:09:00Z
dc.date.issued2006-06
dc.identifier.urihttp://hdl.handle.net/1811/6432
dc.description.abstractFriction stir welding has been developed over the past ten years to permit joining of high strength alloys that cannot be fusion welded. More recently friction stir processing (FSP) has been shown to alter the surface microstructure of a material by essentially in situ thermo mechanical processing. In this study we have used FSP to alter the surface microstructure of Ti-6Al-4V. In all trials, the friction stir processing (FSP) applied to the surface of cast +H.I.P. slabs has resulted in changing the coarse lamellae to small equiaxed α grains that are about 1 in diameter. This process leaves the coarse lamellar microstructure in the bulk of the material. These findings are believed to produce a microstructure that will have better fatigue strength than what was previously available from the cast + H.I.P. coarse microstructure. Orientation imaging microscopy (OIM) of the fine-grained, equiaxed process zone has shown that there is no preferred grain orientation. A new technique for locally measuring yield strength using small, in-situ compressive cylinders (pillars) has been used to determine the strength change between the fine grain and as-cast structure. Pillars made from focused ion beam milling (FIB) have demonstrated that the fine-grained stirred material is about 30% stronger than the as-cast material. Definition of the mechanism that controls the conversion from the lamellar structure to the equiaxed structure is still being developed, but several observations suggest that the -transus has not been exceeded. More work is being done to verify the fatigue strength of the new microstructure, and to develop a better understanding of the mechanism that controls the conversion process. This work is ongoing but the microstructure changes associated with FSP are described in here.en
dc.description.sponsorshipOffice of Naval Researchen
dc.format.extent4560839 bytes
dc.format.mimetypeapplication/pdf
dc.language.isoen_USen
dc.publisherThe Ohio State Universityen
dc.relation.ispartofseriesThe Ohio State University. Department of Materials Science and Engineering Honors Theses; 2006en
dc.subjectFriction stir processing of Ti-6Al-4Ven
dc.titleMicrostructural Evolution of Friction Stir Processed Ti-6Al-4Ven
dc.typeThesisen
dc.rights.ccAttribution-NonCommercial-NoDerivs 2.5 Genericen_US
dc.rights.ccurihttp://creativecommons.org/licenses/by-nc-nd/2.5/en_US


Files in this item

Thumbnail

Items in Knowledge Bank are protected by copyright, with all rights reserved, unless otherwise indicated.

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivs 2.5 Generic
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivs 2.5 Generic