Show simple item record

dc.contributor.advisorDaniels, Jeffrey
dc.creatorGonsiewski, James
dc.date.accessioned2011-06-01T20:52:07Z
dc.date.available2011-06-01T20:52:07Z
dc.date.issued2011-06
dc.identifier.urihttp://hdl.handle.net/1811/48899
dc.description.abstractImage processing software is used in many ways but as far as I have seen, it has not been used to analyze SEM or petrographic thin sections. This use will be very beneficial at the very least as a compliment to current mineral and lithologic studies but the potential is limitless with the right programming. The goal of my thesis was to test for the potential of using standard image processing software, IDL and ENVI, to analyze these thin sections. I have found it to be very feasible to use software packages already available for topographic and satellite image analysis. Isolating pixels and adjusting the display colors have proven to be a relatively simple tasks that can be put to use by someone with very little experience using this software. Though, more work will need to be done to put this to greater use, these programs have demonstrated a great deal of potential for this use in the field.en_US
dc.language.isoen_USen_US
dc.publisherThe Ohio State Universityen
dc.relation.ispartofseriesThe Ohio State University. School of Earth Sciences Senior Theses; Spring 2011en_US
dc.subjectImage Processingen_US
dc.subjectThin Sectionsen_US
dc.subjectPetrologyen_US
dc.subjectSEM imagesen_US
dc.subjectIDLen_US
dc.subjectENVIen_US
dc.titleImage Processing of Petrographic and SEM Imagesen_US
dc.typeThesisen_US
dc.description.embargoNo embargoen_US


Files in this item

Thumbnail

Items in Knowledge Bank are protected by copyright, with all rights reserved, unless otherwise indicated.

This item appears in the following Collection(s)

Show simple item record