Show simple item record

dc.contributor.advisorChubb, Gerald P.
dc.creatorBurger, George
dc.date.accessioned2005-05-17T17:12:21Z
dc.date.available2005-05-17T17:12:21Z
dc.date.issued2005-06
dc.identifier.urihttp://hdl.handle.net/1811/297
dc.descriptionUndergraduate Honors Research Thesis, Aviation Departmenten
dc.description.abstractThe aviation industry depends heavily on the trained professionals that control the aircraft from the cockpit. Airlines invest substantial resources to training and evaluating these pilots. Today, most of those assessments of pilot performance are based on subjective evaluations by another experienced pilot called a check airman. In order to better train and evaluate pilots’ performance, quantitative methods of evaluation are required. Through the use of a flight data recorder (FDR), the various parameters of a flight segment were analyzed, including ground track and altitude. By developing a set of metrics to quantitatively evaluate the performance of a flight, a scale can be established to determine the quality of flight. By combining and modifying the metrics, any phase of flight or set of maneuvers may be evaluated in the future. For this research project, a FDR was placed in the cargo area of various Cessna 172 aircraft and flown to known locations. The pilots were students of The Ohio State University enrolled in flight education. The data from the FDR was used to analyze the altitude and ground track of the aircraft during the flight. Based on this data, measures were devised to evaluate student performance on future flights. This system will be extremely useful in evaluating solo cross-country flights, where the student is the sole occupant of the aircraft. Students are required by federal regulation to successfully complete several hours of solo flight before obtaining various pilot certificates, and the FDR is a tool that can be implemented to evaluate the performance of the students while they are flying solo. The purpose of this project was to demonstrate the use of a FDR as a tool of instruction, establish measures for ground track and altitude performance, and to enable an evaluator to predict the chance of a pilot exceeding Practical Test Standards (PTS) minima in straight and level, un-accelerated flight. The project accomplished these goals, and laid the ground work for future research to turn the FDR into a tool for flight instruction, accident investigation, collision avoidance, and pilot performance evaluation.en
dc.description.sponsorshipThe Ohio State University, College of Engineeringen
dc.format.extent1644908 bytes
dc.format.mimetypeapplication/pdf
dc.language.isoen_US
dc.publisherThe Ohio State Universityen
dc.relation.ispartofseriesThe Ohio State University. Department of Aviation Honors Theses;2005
dc.subjectCross-Country Flighten
dc.subjectPilot Evaluationen
dc.subjectHuman Factorsen
dc.subjectGround Tracken
dc.subjectHolding Altitudeen
dc.subjectFlight Data Recorderen
dc.titleQuantitative Analysis of Cross-Country Flight Performance Dataen
dc.typeThesisen
dc.rights.ccAttribution-NonCommercial-NoDerivs 2.0 Genericen_US
dc.rights.ccurihttp://creativecommons.org/licenses/by-nc-nd/2.0/en_US


Files in this item

Thumbnail

Items in Knowledge Bank are protected by copyright, with all rights reserved, unless otherwise indicated.

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivs 2.0 Generic
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivs 2.0 Generic