OSU Navigation Bar

The Ohio State University University Libraries Knowledge Bank

Corrosion of Thin Film Magnetic Disk: Galvanic Effects of the Carbon Overcoat

Please use this identifier to cite or link to this item: http://hdl.handle.net/1811/44524

Show full item record

Files Size Format View
12_FrankelG_Cor ... lmMagnetic_1989_p42-46.pdf 403.9Kb PDF View/Open

Title: Corrosion of Thin Film Magnetic Disk: Galvanic Effects of the Carbon Overcoat
Creators: Brusic, V.; Russak, M.; Schad, R.; Frankel, G.; Selius, A.; DiMilia, D.; Edmonson, D.
Keywords: carbon overcoats
corrosion behavior
galvanic effects
thin film magnetic disks
Issue Date: 1989
Citation: Brusic, V.; Russak, M.; Schad, R.; Frankel, G.; Selius, A.; DiMilia, D.; Edmonson, D. "Corrosion of Thin Film Magnetic Disk: Galvanic Effects of the Carbon Overcoat," Journal of the Electrochemical Society, v. 136, no. 1, 1989, pp. 42-46.
Abstract: Thin film magnetic disks are usually coated with a layer of carbon or silica to improve wear properties, enhance flyability, and reduce environmental degradation of the underlying metal layers. In this paper we investigated the effect of dc and RF sputter deposited carbon overcoats on the corrosion behavior of the magnetic layers using electrochemical techniques and a corrosive gas chamber. Corrosion test samples were characterized by optical microscopy, ellipsometry, scanning electron microscopy (SEM), and scanning Auger spectroscopy (SAM) in order to establish the mechanism of corrosion. Corrosion of the magnetic layer was found to be galvanically coupled to the carbon overcoat and influenced by several disk processing parameters.
URI: http://hdl.handle.net/1811/44524
ISSN: 0013-4651 (print)
Bookmark and Share
Attribution-ShareAlike 3.0 Unported This item is licensed under a Creative Commons License:
Attribution-ShareAlike 3.0 Unported